July 2014 update

Hi all,

Hahaha...its been quite a while since my last post. MALASSSS....hehehe..

Just an update on what I have done to the red neo, not in chronological order btw :-

1. Installed the customized window shades
2. Carbon vinyl wrap on dash panels, plastic door trims and a-pillars
3. Painted other plastic door trims
4. Customized boost gauge pod for the a-pillar
5. Installed and wired up the Works Engineering boost gauge
6. Installed an APM double core radiator
7. Bought an original SPAL radiator fan
8. Heat shielded the upper radiator hose and air conditioning pipes
9. Fabricated and installed a Cold Airbox for the air intake

Current projects:-

1. Fabricating a switch panel for the dash for the SPAL fan and other accessories
2. Fabricating a Cold Air intake pipe for the Cold Airbox via utilizing the OEM snorkel.

Near future projects :-

1. DIY radiator diversion plate for better cooling efficiency
2. Downpipe Heatwrap using DEI Titanium wrap (bought from Rev Performance Sunway @ RM280)
3. To finish vinyl wrap driver side dashboard panels
4. Paint driver side and middle dashboard A/C vents.
5. Paint the intercooler black
6. Fabricate an intercooler water spray
7. Heatwrap the post intercooler pipes

(No. 3 & 4 will be done once I figure out how to dismantle the parts...☺)

By the items listed in the completed projects and the ones in progress, I bet you can already guessed that I have opted to go for the Forced Induction route for power....

Yup, the redneocpsr3 is currently hooked up with a TD04hl and churning out 150whp at a measely 0.25 bars of boost. Fuel is managed by a Unichip management system and tuned by GT Auto of sunway. Why only 0.25 bar of boost you ask? Well, suffice to say that it will be increased to at least 0.5 bars before Aidilfitri...insya Allah if I have the time.

I will be posting each project listed above in the near future but for now, I'll just leave a few pictures for you to enjoy...

Selamat berpuasa...